9008PN

IME Model 9008PN Life Saver Series Indicating Temperature Transmitter accepts the input from a Pt100 RTD or Type J or K Thermocouple and displays temperature in degress F or C. The 4 Digit display reads from -999 to 9999 in either unit. All adjustments are made through membrane switches provided on the front panel or by using an IR remote controller. The unit operates off a 24V DC power supply commonly available in most control rooms. Alternately the unit can be also supplied to work off either a 110V AC 60Hz or 230V AC 50Hz power mains. An isolated 4 to 20 mA signal is provided that can be used for indicating or control purposes.

PDF Data Sheet || Send Inquiry     

9008PR

IME Model 9008PR Life Saver Series loop indicator accepts the input from a Pt100 RTD or type J or K Thermocouple and displays temperature in degrees F or C. The 4 digit display reads -999 to 9999 in either unit. All adjustments such as display, alarm settings, reset values can be assigned using membrane keys or by using an IR remote controller. This feature allows fro easy setting without the use of potentiometers or even opening the front panel. The unit operates off a 24V DC power supply commonly available in most control rooms. Alternately the unit can be also supplied to work off either a 110V AC 60Hz or 230V AC 50Hz power mains. An isolated 4 to 20 mA signal is provided that can be used for indicating or control purposes.

PDF Data Sheet || Send Inquiry     

9008TP

The Model 9008TP Life Saver Series Multichannel Process Scanner accepts up to eight or sixteen sensor inputs of RTD Pt-100, Thermocouple (J or K) or 4-20 mA. Each channel can be individually programmed to accept the required input and display the process variables sequentially on the digital display at an adjustable scan rate. A separate display indicates the corresponding Channel number being scanned. The 4 digit display reads -999 to +9999 in either unit. The Scanner has four independently settable Relay change-over contacts for effecting any desired control action. Further, an array of LEDs indicate the channels in alarm condition at any given time. Other features include Channel Hold, Skip, Scan Rate settings, faulty channel indication, etc.

PDF Data Sheet || Send Inquiry