9008PP

IME Model 9008PP Panel Mounted Loop Indicator allows the process variable from any 4-20 mA current source t be monitored. Since the unit derives its power from the loop, no additional power supply or wiring is needed. Because of its low voltage drop (5.5 Volts at 20 mA), it can be incorporated into almost any 2 wire loop, where local indication of a process variable is needed, because the integral transmitter indicator is inaccessible to view or at a different locaiton.

PDF Data Sheet || Send Inquiry     

9008KN

IME Model 9008KN Life Saver Series temperature accepts the input from a type J or K thermocouple and displays temperature in degress F or C. Since the unit derives its power from an in-built battery source it can be installed in any penel or wall with out the need for any power source, making it a versatile, easy to install device.

PDF Data Sheet || Send Inquiry     

9008MP

IME Model 9008MP Life Saver Series Temperature Indicator accepts the input from a Pt100 RTD or Type J or K Thermocouple and displays temperature in degrees F or C. The 4 Digital display reads from -999 to 9999 in either unit. All adjustments can be made using either the membrane switches on the front panel or the IR remote controller. The unit operates off a 24V DC power supply commonly available in most Control Rooms. Alternately the unit can be also supplied to work off either a 110V AC 60Hz or 230V AC 50Hz power mains.

PDF Data Sheet || Send Inquiry     

9008RR

IME Model 9008RR Life Saver Series Process Indicator accepts the input from a 2 wire transmitter and displays the process variable in engineering units. The engineering units can be made to read -999 to 9999. All settings such as display, alarm settings, reset values can be assigned using membrane keys on the front of the panel or by using an IR remote controller. This feature allows for easy setting and changing alarms without the use of potentiometers or even opening the front panel. The unit operates off a 24V DC power supply commonly available in most Control Rooms. Alternately the unit can be also supplied to work off either a 110V AC 60Hz or 230V AC 50Hz power mains. Provision fro powering the transmitter with a 24V DC power supply is available when the unit works off an AC power supply.

PDF Data Sheet || Send Inquiry     

9008FR

IME Model 9008FR Digital Flow Indicator accepts a 4 to 20mA signal or pulse from a flow meter and displays the flow rate and the totalized flow. Two independent alarms can be assigned to either the flow rate or totalized flow, making the unit ideal for batch control.

The flow rate is displayed on a bright 4 digit LED and the totalized flow on a 8 digit LED which are updated in less than one second. All parameters including alarm values, reset etc can be assigned using membrane keys on the front panel or by using an IR remote controller. This feature allows fro easy setting with out the use of potentiometers of even opening the front panel.

PDF Data Sheet || Send Inquiry