|
|
|
|
|
IME Model 8080PP Loop Powered Digital Indicators allow the process variable from any 4-20 mA current source t be monitored.
Since the unit derives its power from the loop, no additional power supply or wiring is needed. Because of its low voltage drop
(5.5 Volts at 20 mA), it can be incorporated into almost any 2 wire loop, where local indication of a process variable is needed,
because the integral transmitter indicator is inaccessible to view or at a different locaiton.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
|
IME Model 8080MK Loop Powered Digital Indicators allow the process variable from any 4-20 mA current source t be monitored.
Since the unit derives its power from the loop, no additional power supply or wiring is needed. Because of its low voltage drop
(5.3 Volts at 20 mA), it can be incorporated into almost any 2 wire loop, where local indication of a process variable is needed,
because the integral transmitter indicator is inaccessible to view or at a different locaiton.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
|
IME Model 8080MN Digital Process Indicators allow the process variable from any two wire transmitter to be monitored in the field. Since the unit can also provide 24VDC to the transmitter, the unit can be used to power any 2 wire transmitter in the field.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
|
IME Model 8080RR Digital Indicators allow the process variable from any two wire transmitter to be monitored in engineering units and 2 corresponding alarms to be assigned. Both alarms can be assigned either high or low within the selected range.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
|
IME Model 8080KN Battery Operated Digital Temperature Indicator
accepts an input from a standard Type J or K Thermocouple or RTD and
provides local indication of temperature in °F or °C. Designed
specifically to replace Bimetallic Sensors, 8080KN becomes a universal
instrument since only one instrument will indicate the entire useful range
of the thermocouple (-100 to 900°C). This eliminates having several
bimetallic sensors where the dial range has to be predetermined.
Operating costs are also drastically reduced since the temperature
sensor can be easily replaced in case of failure, unlike a bimetallic
sensor where the entire instrument has to be discarded. Furthermore
thermocouples are a lot more reliable, accurate and stable when
compared to the archaic bimetallic sensor.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
|
IME Model 8080PR allows 2 independent alarms to be assigned over
the temperature range of the sensor. The unit will accept an input from
a Pt100 RTD or Type J or K thermocouple and provide an indication
on a bright 4 digit LED. The unit serves a dual purpose since in addition
to local indication of temperature, which is switch selectable to read °F
or °C, it also serves as an accurate and repeatable temperature switch.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
|
IME Model 8080FR Digital Flow Indicator and Totalizer with Dual Relays. It accepts a 4~20mA Singal or pulse from a meter and
displays the flow rate and totalized flow. Two independent alarms can be assigned to either the flow rate or the totalized flow, making the unit
ideal for batch control.
|
|
PDF Data Sheet
||
Send Inquiry
|
|
|
|
