Model 8080PP Loop Powered Indicator with LCD Display

Introduction

IME Model 8080PP Loop Powered Digital Indicators allow the process variable from any 4-20mA current source to be monitored. Since the unit derives its power from the loop, no additional power supply or wiring is needed. Because of its low voltage drop (5.5 Volts at 20mA), it can be incorporated into almost any 2 wire loop, where local indication of a process variable is needed, because the integral transmitter indicator is inaccessible to view a different location.

Description

IME Model 8080PP Indicators are designed for use in process industries where vibration, inclement weather and corrosive atmospheres prevail. The electronics are enclosed in a copper-free epoxy coated Aluminum housing and for more aggressive environments, a SS316 housing is optionally available. The housings meet the requirements of NEMA 4X, and will soon be certified Explosion Proof by FM and CSA.

LCD Meter

The Model 8080PP has 4 digit display and may be configured to read -9999 to 9999 with a 4-20mA input signal. The decimal point location and engineering units can be adjusted using membrane switches, eliminating all potentiometric adjustments.

Mounting

A wide choice of stainless steel mounting brackets are available for mounting the Model 8080PP on either a 2" pipe or wall.

Certification System

Functional Specifications

Indication Accuracy
0.1% of calibrated range +/-1 digit

Calibration
Via membrane switches on the front panel

Display Height
4 digit 14mm(0.5") high LCD, user selectable decimal point

Stability Over Time
0.1% of calibrated range +/-1 digit over 6 months

Over Range Indication
Indication of "H H H H" or "L L L L" blinking on display

Response Time
0.3~0.5s

Failure Mode
Failure will not affect the loop integrity

Voltage Drop
5.5V at 20mA

Operating Temperature
-50 to 75°C

Material of Construction
Enclosure Epoxy Coated Copper-Free Aluminum or SS316 as specified

O Ring
Buna N

Weight
0.9Kg (2LBS) for Aluminum unit and 1.4Kg (3LBS) for SS316 Unit

Optional Accessories
Mounting Brackets (IME Model 175PM, 175RC, 175NR, 175MN)

Order Information

Model	Description
8080PP	Field Mounted Loop Powered Indicator with 4 Digital LCD Display
	Code	Options, Housing
	A	Die cast Aluminum, Epoxy Coated
	T	SS316, Electro Polished
		Code	Instrument Connection (T1)			Conduit Size (T2)
		01	T1=M16 x 2P (See note 1)			T2=¾"NPT
		02	T1=M16 x 2P (See note 1)			T2=½"NPT
		03	T1=M16 x 2P (See note 1)			T2=M20 x 1.5P (See note 2)
		04	T1=½"NPT			T2=¾"NPT
		05	T1=½"NPT			T2=½"NPT
		06	T1=½"NPT			T2=M20 x 1.5P (See note 2)
		07	T1=¾"NPT			T2=¾"NPT
		08	T1=¾"NPT			T2=½"NPT
		09	T1=¾"NPT			T2=M20 x 1.5P (See note 2)
		10	T1=½"BSP (See note 2)			T2=¾"NPT
		11	T1=½"BSP (See note 2)			T2=½"NPT
		12	T1=½"BSP (See note 2)			T2=M20 x1.5P (See note 2)
		13	T1=¾"NPT			T2=None
		14	T1=M20 x 1.5P (See note 2)			T2=None
		16	T1=½"BSP (See note 2)			T2=None
		17	T1=½"NPT			T2=None
			Code	Certification
			NN	None
			E1	FM / CSA Explosion Proof Certified, NEMA 4X, T6
				Code	Accessories
				RC	IME Model 175RC Mounting Bracket (Click here for more information)
				PM	IME Model 175PM Mounting Bracket (Click here for more information)
				NR	IME Model 175NR Mounting Bracket (Click here for more information)
				MM	IME Model 175MM Mounting Bracket (Click here for more information)
					Code	2 Inch "U" Bolt with Nuts and Washers
					00	None
					01	IME Model 17508, 1 Set (For IME Model 175RC)
					02	IME Model 17508, 2 Sets (For IME Model 175PM & 175NR)

8080PP

Typical Model Number