INTERNATIONAL METAL ENGINEERING            
 INDICATING TEMPERATURE TRANSMITTER       8080PN
n INPUT: RTD PT100 OR THERMOCOUPLE TYPE J / K
n OUTPUT 4~20MA, 2 WIRES
n 4 DIGIT DISPLAY IN DEGREES C OR F
n CHOICE OF ALUMINUM OR SS316 ENCLOSURE
n EXPLOSION PROOF CERTIFIED
n TEMPERATURE LINEARIZED
n 3 YEAR WARRANTY
Introduction         Functional Specifications  
IME Model 8080PN is a two wire indicating transmitter which coverts  Sensor
input from a Type J/K Thermocouple or Pt100 sensor into a load
independent 4-20mA process signal. A 4 digit bright red LED allows for Type J/K Thermocouple or Pt100 RTD     
local indication of Temperature, which is switch selectable to read Degree Indication Accuracy
C or F.
0.1% of Calibrated range +/- 1 digit      
Lead Compensation Error
Description        
IME  Model  8080PN  Transmitters  are  designed  for  use  in  process <+/-0.05/10W lead resistance      
industries where vibration, inclement weather and corrosive atmospheres Stability Over Time
prevail. The  electronics are enclosed in a  copper-free epoxy  coated
Aluminum  housing  and  for  more  aggressive  environments,  a  SS316 0.1% of calibrated range +/-1 digit over 6 months    
housing  is  optionally  available. The housings meet the requirements of Temperature Stability
NEMA4X, and are also certified Explosion Proof by FM/CSA.
+/-0.01% per Degree C        
Burnout Protection
LED Meter        
IME Model 8080PN has 4 digit bright red LED and may be configured to Upscale          
read temperature in either degrees C or F. The zero and span setting for Supply Voltage
4 to 20mA signal as well as the units of display can be set either using
the membrane switches on the front panel, eliminating potentiometric 18~28V DC          
adjustments. Supply and Load Effect
Mounting         <0.03% of span for full change      
A wide choice of stainless steel mounting brackets are available for Operating Temperature
mounting the Model 8080PN on either a 2" pipe or wall.
-50~75oC           
Weight
Certification System 
0.9Kg (2LBS) for Aluminum Unit and 1.4Kg (3LBS) for SS316 unit
Material of Construction
Enclosure epoxy coated Copper-Free Aluminum or SS316 as specified
O Rings
Buna N          
Optional Accessories
Mounting Brackets (IME Model 175PM, 175RC, 175NR, 175MM)
                             
International Metal Engineering Pte Ltd http://www.intmet.com
  INTERNATIONAL METAL ENGINEERING            
 INDICATING TEMPERATURE TRANSMITTER       8080PN
Both the Aluminum and the SS316 housing are certified NEMA4X. As indicated below. IME model 8080PN can be optionally provided with
certification and a stainless steel name plate for use in Hazardous Area applications.
Ordering Information
Model Description                    
  8080PN Field Mounted Indicating Transmitter with LED Display              
   
 
Code Options, Housing                
    A Die cast Aluminum, Epoxy Coated    
    T SS316, Electro Polished                
   
 
Code Instrument Connection (T1)   Conduit Size (T2)      
      01 M16 x 2P (See note 1)     ¾" NPT        
      02 M16 x 2P (See note 1)     ½" NPT        
      03 M16 x 2P (See note 1)     M20 x 1.5P (See note 2)      
      04 ½" NPT       ¾" NPT        
      05 ½" NPT       ½" NPT        
      06 ½" NPT       M20 x 1.5P (See note 2)      
      07 ¾" NPT       ¾" NPT        
      08 ¾" NPT       ½" NPT        
      09 ¾" NPT       M20 x 1.5P (See note 2)      
      10 ½" BSP (See note 2 & 3)     ¾" NPT        
      11 ½" BSP (See note 2 & 3)     ½" NPT        
      12 ½" BSP (See note 2 & 3)     M20 x 1.5P (See note 2)      
      13 ¾" NPT       None        
      14 M20 x 1.5P (See note 2)     None        
      16 ½" BSP (See note 2 & 3)     None        
      17 ½" NPT       None        
   
 
Code Certification      
    NN None              
    E1 FM / CSA Explosion Proof Certified, NEMA 4X ,T6      
   
 
Code Accessories          
      RC IME Model 175RC Mounting Bracket      
      PM IME Model 175PM Mounting Bracket      
      NR IME Model 175NR Mounting Bracket      
      MM IME Model 175MM Mounting Bracket      
     
 
  Code 2 Inch "U" Bolt with Nuts and Washers  
          00 None        
          01 IME Model 17508, 1 Set (For IME Model 175RC)  
          02 IME Model 17508, 2 Sets (For IME Model 175PM & 175NR)
     
 
     
     
                           
 
  8080PN A 02 E1 PM   02
Typical Model Number
Note:
1 Ports with M16 x 2P thread are not through holes, they are for Mounting only.
2 ½"BSP & M20 x 1.5P Threads are not Certified by CSA
3 ½"BSP threads are not FM Approved.