INTERNATIONAL METAL ENGINEERING            
FIELD MOUNTED PROCESS INDICATOR       8080MN 
n 4~20MA INPUT
n 4 DIGIT LED DISPLAY IN ENGINEERING UNITS
n CHOICE OF ALUMINUM OR SS316 ENCLOSURE
n EXPLOSION PROOF CERTIFIED
n AUX POWER SUPPLY FOR TRANSDUCER (24V DC)
n WALL OR PIPE MOUNTING
n 3 YEAR WARRANTY
Introduction         Functional Specifications  
IME Model 8080MN Digital Process Indicator allows the process variable  Indication Accuracy
from any transmitter to be monitored in the field. Since the Unit can also 
provide 24V DC to the transmitter,  the unit can be used to power any 2- 0.1% of calibrated range +/-1 digit      
wire transmitter in the field. Calibration
Via membrane switches on the front panel     
Description         Display Height
IME Model 8080MN Indicator is designed for use in process industries
where vibration, inclement weather and corrosive atmospheres prevail. The 10mm high LED, user selectable decimal point    
electronics are enclosed in a copper-free epoxy coated Aluminum housing Stability Over Time
and  for  more  aggressive  environments,  a SS316 housing is optionally
available. The housing meets the requirements of NEMA4X, and are also 0.1% of calibrated range +/-1 digit over 6 months    
certified Explosion Proof by FM/CSA. Over Range Indication
Indication of "HIGH" on Display      
LED Meter         Response Time
8080MN has 4 digit LED display and can be configured to read from -999
to 9999 with 4-20mA input signal. The decimal point location, engineering 0.3~0.5s          
units, alarm settingsˇ­.etc can be adjusted via membrane keys on the Operating Temperature
front panel eliminating all potentiometric adjustments.
-50 to 75oC          
Weight
0.9Kg (2LBS) for Aluminum Unit and 1.4Kg (3LBS) for SS316 unit
Mounting         Material of Construction
A wide choice of stainless steel mounting brackets are available for
mounting the Model 8080MN on either a 2" pipe or wall. Enclosure epoxy coated Copper-Free Aluminum or SS316 as specified 
O Rings
Certification System  Buna N          
Optional Accessories
Mounting Brackets (IME Model 175PM, 175RC, 175NR, 175MM)
                             
International Metal Engineering Pte Ltd http://www.intmet.com
  INTERNATIONAL METAL ENGINEERING            
FIELD MOUNTED PROCESS INDICATOR       8080MN 
Both the Aluminum and the SS316 housing are certified NEMA 4X. As indicated below. IME model 8080MN can be optionally provided with
certification and a stainless steel name plate for use in Hazardous Area applications.
Ordering Information
  Model Description                    
  8080MN Field Mounted Process Indicator with LED Display              
   
 
Code Options, Housing                
    A Die cast Aluminum, Epoxy Coated    
    T SS316, Electro Polished                
   
 
Code Instrument Connection (T1)   Conduit Size (T2)      
      01 M16 x 2P (See note 1)     ¾" NPT        
      02 M16 x 2P (See note 1)     ½" NPT        
      03 M16 x 2P (See note 1)     M20 x 1.5P (See note 2)      
      04 ½" NPT       ¾" NPT        
      05 ½" NPT       ½" NPT        
      06 ½" NPT       M20 x 1.5P (See note 2)      
      07 ¾" NPT       ¾" NPT        
      08 ¾" NPT       ½" NPT        
      09 ¾" NPT       M20 x 1.5P (See note 2)      
      10 ½" BSP (See note 2 & 3)     ¾" NPT        
      11 ½" BSP (See note 2 & 3)     ½" NPT        
      12 ½" BSP (See note 2 & 3)     M20 x 1.5P (See note 2)      
      13 ¾" NPT       None        
      14 M20 x 1.5P (See note 2)     None        
      16 ½" BSP (See note 2 & 3)     None        
      17 ½" NPT       None        
   
 
Code Certification      
    NN None              
    E1 FM / CSA Explosion Proof Certified, NEMA 4X ,T6      
   
 
Code Accessories          
      RC IME Model 175RC Mounting Bracket      
      PM IME Model 175PM Mounting Bracket      
      NR IME Model 175NR Mounting Bracket      
      MM IME Model 175MM Mounting Bracket      
     
 
  Code 2 Inch "U" Bolt with Nuts and Washers  
          00 None        
          01 IME Model 17508, 1 Set (For IME Model 175RC)  
          02 IME Model 17508, 2 Sets (For IME Model 175PM & 175NR)
     
 
     
     
                           
 
    8080MN A 02 E1 PM   02
Typical Model Number
Note:
1 Ports with M16 x 2P thread are not through holes, they are for Mounting only.
2 ½"BSP & M20 x 1.5P Threads are not Certified by CSA
3 ½"BSP threads are not FM Approved.
INTERNATIONAL METAL ENGINEERING PTE LTD ,CAUTION OPEN CIRCUIT BEFORE REMOVING COVER,OUVRIR LE CIRCUIT AVANT DENLEVER LE COUVERCLE,8080MN
                             
International Metal Engineering Pte Ltd http://www.intmet.com
  INTERNATIONAL METAL ENGINEERING            
MODEL 175RC MOUNTING BRACKET          
IME MODEL 175RC
PANEL / WALL MOUNTING CONFIGURATION
9 mm or 5/16 bolts for mounting bracket to wall or panel
(Not Supplied)
Adaptor P/N: 22305 (Optional)
2ˇ± PIPE MOUNTING CONFIGURATION
2 Inch "U" Bolt with Nuts and Washers (Optional)
Adaptor P/N: 22305 (Optional)
                             
International Metal Engineering Pte Ltd http://www.intmet.com
  INTERNATIONAL METAL ENGINEERING            
MODEL 175PM MOUNTING BRACKET        
IME MODEL 175PM
PANEL / WALL MOUNTING CONFIGURATION
9 mm or 5/16 bolts for mounting bracket to wall or panel
(Not Supplied)
Adaptor P/N: 22306 (Optional)
Text Box: 175PM Mounting Bracket
Text Box: 3mm
2ˇ± PIPE MOUNTING CONFIGURATION
2 Inch "U" Bolt with Nuts and Washers (Optional)
Adaptor P/N: 22306 (Optional)
Text Box: IME Model 17508
                             
International Metal Engineering Pte Ltd http://www.intmet.com
  INTERNATIONAL METAL ENGINEERING            
MODEL 175NR AND 175MM MOUNTING BRACKET        
IME MODEL 175NR
2ˇ± PIPE MOUNTING CONFIGURATION
2 Inch "U" Bolt with Nuts and Washers
IME MODEL 175MM
PANEL / WALL MOUNTING CONFIGURATION
9 mm or 5/16 bolts for mounting bracket to wall or panel
(Not Supplied)
                             
International Metal Engineering Pte Ltd http://www.intmet.com